Errata
Errata corrected in book's fourth printing, 2011
These are also incorporated in the posted data tables (English version)
1. Typographical error:
Eq. (10.67), replace exponent "w" with "s" to read [1-a..]s
2. Section 10.8.2, Chapter 10 references
Update reference "Ekin (2007) Cryogenics…" with the following:
Ekin, J. W. (2010). "Unified scaling law for flux pinning in practical superconductors: 1. Separability postulate, raw scaling data and parameterization at moderate strains," Supercond. Sci. Technol. 23, 083011.
3. Appendix A1.7, Suppliers: new entry under "Materials, less common":
Aluminum—ultrapure wire
Alcoa Research Lab, 100 Technical Drive, Alcoa Center, PA 15069, Tel. 724-337-5300, http://www.alcoa.com/
Sumitomo Chemical, http://www.sumitomo-chem.co.jp/english/
Swiss Federal Institute of Technology in Zurich, ETH Zurich, Rämistrasse 101, 8092 Zurich, Switzerland,
Tel. +41 44 632 1111, Fax. +41 44 632 1010, http://www.ethz.ch
4. Appendix A3.2, Heat conduction (stainless steel tubing), typographical error:
Row labeled "3/8" and column "Wall thickness": replace "0.004 (0.10)" with "0.006 (0.15)";
Row labeled "1/2" and column "Wall thickness": replace "0.004 (0.10)" with "0.006 (0.15)"
5. Appendix A6.5b, Total electrical resistivity, typographical error:
Delete subscript "i" for rho in table title, to read:
"A6.5b Alloy total resistivity rho […]"
6. Appendix A6.7, Thermal conductivity (beryllium-copper)
Under column "100K" replace "41" with "43"
Under column "150K" replace "41" with "57"
Under column "200K" replace "31" with "72"
Under column "100K" replace "9.7" with "95"
Data source: D. E. Gray, ed. (1972), Thermal Conductivity of Alloys, Am. Inst. of Physics Handbook, McGraw Hill, Table 4g—9.
Errata corrected in previous printings
Appendix A6.2, Specific Heat of W, typographical error: The correct value at 50 K is 0.033 and at 77 K is 0.068.
Typographical error: The radius of the top plate in the last equation on p. 75 is 0.15 m (not 10.5 m). The calculated value for (0.15 W) is correct, however.
|